Light Heavy or Both   Choosing the Right High G Separation Concept for Paper Production

ECOFARIO High-G Technology: Removing Light and Heavy Contaminants

Light, Heavy or Both? Choosing the Right High-G Separation Concept for Paper Production. Modern paper production involves complex material flows. Different contaminants can enter or accumulate in the process – particularly when recovered paper is used as a raw material. The challenge is not simply to separate solids from water, but to selectively remove unwanted materials while retaining valuable resources in the process.

This is exactly why there is no single separation solution for every process.

Depending on their density, size and physical properties, contaminants behave very differently in water and fiere suspensions. Some are significantly heavier than the carrier liquid. Others are lighter. And many industrial processes contain both at the same time.

ECOFARIO addresses these different requirements with three configurations of the High-G Technology: High-G Light-Line, High-G Heavy-Line and High-G Combi-Line.

Why density matters

The basic principle behind the High-G Technology is the combination of centrifugal and fluid forces with controlled flow patterns.

This allows particles with different densities and physical properties to be separated from liquids efficiently and continuously.

For paper mills, this opens up interesting possibilities.

Process water and fiber-containing streams can carry a broad spectrum of unwanted materials. Heavy and coarse particles behave differently from lighter contaminants, making the individual composition of the process an important factor when selecting the right separation approach.

The starting point is therefore a simple question:

What exactly needs to be removed from the process?

High-G Heavy-Line: targeting heavier and coarse particles

The High-G Heavy-Line targets heavier and coarse particles.

Centrifugal and fluid forces as well as controlled flow patterns enable these materials to be separated from the liquid.

Potential applications in pulp and paper production include process water and fiber-containing streams where unwanted heavier particles need to be removed.

The objective goes beyond cleaner process water. Removing disruptive material at the right point can contribute to process stability and help protect downstream equipment.

Especially in mills processing recovered paper, where the incoming raw material can introduce a wide range of foreign materials, effective contaminant management is an important part of maintaining stable production.

High-G Light-Line: separating light contaminants

Not every unwanted particle is heavy.

Light contaminants require a different separation approach than heavier and coarse particles.

The High-G Light-Line focuses on the separation of particles and contaminants that are lighter than the carrier liquid.

This capability is closely connected to ECOFARIO’s technological roots. The company’s early development focused strongly on microplastics – particles that present a demanding separation challenge because of their size, density and behavior in water.

Today, the High-G Technology can be applied to broader industrial applications where light contaminants need to be removed from liquid process streams.

High-G Combi-Line: when both fractions are present

Industrial processes do not always contain only one type of contaminant.

Light and heavy contaminants can occur within the same process, creating different separation requirements.

The High-G Combi-Line combines both separation principles, enabling light and heavy contaminants to be removed within one process concept.

For paper mills, this can be particularly relevant when dealing with complex material flows and reject treatment.

Improved separation can help to retain valuable material in the production process while unwanted contaminants are removed.

Separation starts with the process

Choosing between High-G Light-Line, High-G Heavy-Line and High-G Combi-Line is therefore not primarily a question of equipment.

It is a question of the individual process.

What does the process contain? Which fraction creates problems? Which material should remain? Where are valuable fibers being lost? And at which point could additional separation create the greatest operational benefit?

The answers differ from mill to mill.

This is why on-site testing and application-specific engineering are an important part of ECOFARIO’s approach. The High-G Technology can also be plug&play integrated into existing industrial processes.

The objective is to identify where separation can make a measurable difference – from contaminant removal and fiber recovery to more stable and resource-efficient paper production.

The decisive question is not simply how much material can be separated. It is what should be separated – and what should stay in the process.

Industrial pump room with stainless steel pipes blue motor orange control boxes and a grated metal floor
High G Separation Concept

More information about ECOFARIO technologies is available at www.ecofario.eco/products

About ECOFARIO GmbH

ECOFARIO GmbH develops next-generation fluid filtration technologies for industrial and environmental applications. With its High-G Technology, ECOFARIO supports paper producers worldwide in improving fiber recovery, reducing energy demand and advancing resource-efficient production processes.

Contact Information: ECOFARIO GmbH  Ph: +49 8152 9937726 E: info@ecofario.eco – www.ecofario.eco

To feature your company on Paper Technology International News please visit our website https://papertechnologyinternational.com or email your press release to info@papertechnologyinternational.com 

author avatar
Ian Horne